+31 (0)318 648100 | MON - THU 08:30 - 17:00h • FRI 08:30 - 16:00h CET

5100 SHOWER CURTAIN TRACKS


  • • The ideal track for shower curtains with the look of a classic curtain pole
  • • Strong, easy to bend and, if necessary, available with suspension hangers
  • • Without suspension hangers, this track can be mounted between two walls across a straight length of up to 250cm
  • • With suspension hangers, this track is the ideal solution in hospitals and care institutions
  • • A very popular track that can be used in a wide variety of situations, such as in private homes and in the care sector
  • • Exceptionally easy to bend


The Goelst 5100 is the ideal track for your shower curtain. This track has the look of a classic curtain pole combined with the comfort of a curtain track. The track is also available with suspension hangers, which means it can be used on a project basis in hospitals and/or care institutions. A very popular track that can be used in a wide variety of situations, such as in private homes and in the care sector.

Features:
  • A stable, elegant shower curtain track that is suitable for all shower curtains
  • Aluminium track; can be forward or reverse bent in different radii
  • Wall or ceiling mounting with suspension hanger or mini-suspension hanger
  • Available as standard in two colours: white and anodised aluminium
  • Accessories available in matching colours
  • Length: 5m, 6m and 7m
  • High-quality coated aluminium

The high-quality, carefully selected materials allow curtains to run silently and smoothly, also round bends. The curtain track can be pre-formed to match customer requirements and delivered as a single piece to eliminate the disadvantage of separate bends and joins in the running length.

Specifications:

  • Material: aluminium
  • Coating colour: white RAL9010
    High quality wear-resistant coating, highly colourfast, UV-resistant
  • Colour: anodised natural aluminium
  • Dimensions (hxw): 26 x 28mm
  • Profile weight: 522 gr/m
  • Maximum supported weight guideline: see fixing guide

Bending

The 5100 can be forward or reverse bent to create attractive returns.

  • Minimum bending radius: 15cm with bending tool 1015
  • Standard bending radius: 25cm with bending tool 1015
  • Other bending radii: greater than 100cm with bending tool 1018

Standard accessories

Gliders, end stops, end caps
Rotating glider with stainless steel hook 4007-60 and one end stop without eye 4002
Fitting
Suspension hanger 4055, 2x end brackets 5149
Accessories
4003-M spring stop, flexible anti-dust strip 4145 and curtain hold-back with fixing plate 4170


Other options

Gliders, end stops, end caps
• Only the 4007-60 rotating glider with a stainless steel hook can be used with these systems.


Mounting – for NEN1010 mounting instructions, please contact Goelst NL
• Ceiling mounting on ceiling tiles with suspension hanger series 4055, ceiling support bracket 5135 or with a 3-cm mini-suspension hanger 4254.
• Wall mounting with end bracket 5149 or plastic wall bracket 5140.
• Flexible anti-dust strip 4145
• 4003 spring stop, a practical additional option if gliders have to be replaced. the entire system does not need to be dismantled. Only the spring has to be taken out.


Accessories
• Curtain hold-back with fixing plate 4170. The hold-back keeps the curtain perfectly in position.

Material:

Aluminium EN AW-6060 T66.
Shape and size tolerances in accordance with EN 12020.
Anodisation: in accordance with QUALANOD requirements, coating thickness 10µm. Natural colour anodised.
Powder coating: in accordance with QUALICOAT requirements, thick coating (+/- 100 µm), AkzoNobel/Goelst quality for improved gliding properties and excellent ductility. White RAL 9010, black RAL 9005.
5100 track weight: 522 gr/m.


Standard colours:

Natural - anodised
White RAL 9010 - powder-coated
Black RAL 9005 - powder-coated
Special colours available on request.


Accessories:

Goelst self-lubricating gliders made from high quality plastic with added Teflon. Nine 4007-60 60 gliders per metre (rotating and with stainless steel hook) and two end stops with stainless steel hook 4001-A-60. Spring stop 4003. Flexible anti-dust strip 4145.


Situation-dependent accessories and mounting method:

Spring stop 4003.
Curtain hold-back 4170.
Direct ceiling mounting with ceiling support bracket 5135.
Lowered track mounting with suspension hanger 4055, 4255 or mini-suspension hanger 4254, attached to structural ceiling.
Right-angle wall mounting with end bracket 5149 or parallel to a wall with wall bracket 5140

Load Release
Gliders : Load Release gliders 4007-60-LR (rotating and with stainless steel hook), with which the release of the curtain from the track can be controlled.
Mounting: Load Release components, with which the release of the track from the fixing points can be controlled.

Insulated mounting in accordance with the NEN 1010 standard
Suspended from the ceiling with suspension hanger 4055 (with plastic wire foot 4156) or G-Leg with 4064 with insulated mounting set.
Insulated wall mounting with wall bracket 5140 or right-angle wall mounting with plastic end bracket 5149.
Curtain hold-back 4170-ISO with plastic fixing plate.
The necessity of installing additional (earthing) safeguards can only be determined on the basis of an on-site risk inventory and evaluation (source: NEN)

Spacing between support points (cm) in accordance with the G-Standard or the table below.


curtain type

light

medium

heavy

per pleat

2 kg

4 kg

8 kg

5100

165

125

100


General advice: place an additional bracket on the stacking side(s) and, if possible, a support point immediately before and/or after a curve.
*) Allow for horizontal sag/swish caused by manual operation. Advice: due to the large number of situation-dependent factors, the specific details of the mounting method should be worked out by/in consultation with Goelst NL


Bending:

Radius 15 cm: bending tool 1015
Radius 25 cm: bending tool 1015
Radius >100 cm: bending tool 1018


Hygiene:

Place the flexible anti-dust strip 4145 on the top side of the track to prevent the accumulation of dirt and grime.

The Goelst 5100 is the ideal track for your shower curtain. This track has the look of a classic curtain pole combined with the comfort of a curtain track. The track is also available with suspension hangers, which means it can be used on a project basis in hospitals and/or care institutions. A very popular track that can be used in a wide variety of situations, such as in private homes and in the care sector.

Features:
  • A stable, elegant shower curtain track that is suitable for all shower curtains
  • Aluminium track; can be forward or reverse bent in different radii
  • Wall or ceiling mounting with suspension hanger or mini-suspension hanger
  • Available as standard in two colours: white and anodised aluminium
  • Accessories available in matching colours
  • Length: 5m, 6m and 7m
  • High-quality coated aluminium

The high-quality, carefully selected materials allow curtains to run silently and smoothly, also round bends. The curtain track can be pre-formed to match customer requirements and delivered as a single piece to eliminate the disadvantage of separate bends and joins in the running length.

Specifications:

  • Material: aluminium
  • Coating colour: white RAL9010
    High quality wear-resistant coating, highly colourfast, UV-resistant
  • Colour: anodised natural aluminium
  • Dimensions (hxw): 26 x 28mm
  • Profile weight: 522 gr/m
  • Maximum supported weight guideline: see fixing guide

Bending

The 5100 can be forward or reverse bent to create attractive returns.

  • Minimum bending radius: 15cm with bending tool 1015
  • Standard bending radius: 25cm with bending tool 1015
  • Other bending radii: greater than 100cm with bending tool 1018

The Goelst 5100 is the ideal track for your shower curtain. This track has the look of a classic curtain pole combined with the comfort of a curtain track. The track is also available with suspension hangers, which means it can be used on a project basis in hospitals and/or care institutions. A very popular track that can be used in a wide variety of situations, such as in private homes and in the care sector.

Features:
  • A stable, elegant shower curtain track that is suitable for all shower curtains
  • Aluminium track; can be forward or reverse bent in different radii
  • Wall or ceiling mounting with suspension hanger or mini-suspension hanger
  • Available as standard in two colours: white and anodised aluminium
  • Accessories available in matching colours
  • Length: 5m, 6m and 7m
  • High-quality coated aluminium

The high-quality, carefully selected materials allow curtains to run silently and smoothly, also round bends. The curtain track can be pre-formed to match customer requirements and delivered as a single piece to eliminate the disadvantage of separate bends and joins in the running length.

Specifications:

  • Material: aluminium
  • Coating colour: white RAL9010
    High quality wear-resistant coating, highly colourfast, UV-resistant
  • Colour: anodised natural aluminium
  • Dimensions (hxw): 26 x 28mm
  • Profile weight: 522 gr/m
  • Maximum supported weight guideline: see fixing guide

Bending

The 5100 can be forward or reverse bent to create attractive returns.

  • Minimum bending radius: 15cm with bending tool 1015
  • Standard bending radius: 25cm with bending tool 1015
  • Other bending radii: greater than 100cm with bending tool 1018

Advice and tips

  • • Maintenance advice: for long-term optimal glider performance in every situation, we recommend using Goelst silicon spray 1251-250
  • • System can also be fitted with an LRS application; contact Goelst NL for more information.

Verzending en afhandeling

De verzendkosten bedragen:
€ 4,95 voor Nederland - Gratis levering voor orders vanaf € 75
€ 7,95 voor België - Gratis levering voor orders vanaf € 100.


Op werkdagen voor 1 uur 's middags besteld, zelfde dag verzonden.

Wij versturen onze pakketten met verschillende vervoerders:

DPD (lengtes tot 150 cm).
Transmission (lengtes vanaf 150 cm)
Enkel haken koorden via PostNL

Loading...
Please wait...