- Description
- parts
- info for architects
- Brochure
- Mounting instructions
- Tips & tricks
With the Goelst 2901 track, you can create a perfect overlap. Because of the low profile height of 8 mm, the track is barely visible. In addition, this track has a superior finishing and two can be fixed precisely parallel to each other to form an elegant combination. The track can be used in the private and/or corporate sector.
Features
- Aluminium track; the 2901 can be bent
- Ceiling mounting, in a window opening or with adjustable extension brackets
- Available as standard in white
- Lengths: 4m and 6m
- Compatible with the Goelst Flow System for regularly pleated curtains.More info about the Goelst Flow System
- High-quality coated aluminium
- Suitable for light or medium-weight curtains
The high-quality, carefully selected materials allow pleated curtains to run silently and smoothly.
Specifications
- Material: aluminium
- Coating colours: white RAL9010
High quality wear-resistant, extremely colourfast, UV-resistant coating - Dimensions (hxw): 8 x 40 mm
- Profile weight: 274 gr/m
- Maximum supported weight guideline: see fixing guide. An additional support point is recommended at points where pleated curtains gather when open.
Bending
The 2901 can be bent with the R20, R25 and R150 bending tools.
Standard components
Gliders:
Twelve self-lubricating 2010 gliders per metre and two 2001 end stops per track system.
Fixing:
Concealed ceiling mounting with 4.5 x 45mm screws with white caps 4514-WD
Accessories:
2x end caps 2953-01
Tracks longer than the standard length can be joined together with connecting bridge 2952.
Optional components:
Gliders:
• 2010 gliders are available with various hook types.
• For perfectly closing curtains with an overlap of the curtain fabric, use pilot runner 4074-1000 or the smaller pilot runner 4075-1000.
• Track 2901 is compatible with the Goelst Flow system: gliders 2014-060 or 2014-080.
• The 2012 click glider can be placed anywhere in the system. It is advisable to place gliders of this type on the stacking side.
Fixing:
• Concealed ceiling mounting with 4.5 x 45mm screws and white caps – custom-made profiles have pre-punched holes as standard.
• Adjustable extension bracket 9-15cm (that can be shortened) 2917
Accessories:
• Use the special glider stop for ‘spring-back’ curtain sets: fit the glider stop over a 2010 glider after it has been inserted in the channel profile. Several glider stops can be placed if necessary.
• Selection of various pull rods for opening and closing curtains by hand: usually used with curtains that are light in colour and show signs of wear more quickly and delicate curtain fabrics, such as sheers (in combination with lead gliders 4074-1000 or 4075-1000).
Material
Aluminium EN AW-6060 T66.
Shape and size tolerances in accordance with EN 12020.
Powder coating: in accordance with QUALICOAT requirements, thick coating (+/- 100 µm), AkzoNobel/Goelst quality for improved gliding properties and excellent ductility. White RAL 9010. Special colours available on request.
2901 track weight: 274 gr/m
Standard colours
White RAL 9010 – powder coated
Special colours available on request.
Standard accessories
Goelst self-lubricating, UV-resistant gliders made from high-quality plastic. Twelve 2010 gliders per metre, two 2001 end stops plus two end caps 2953-01 per track length.
Ceiling mounting with (4.5 x 45mm) screws with decorative cap 2914-WD (in profiles with pre-drilled holes) (the amount required depends on the system length).
Connecting bridge 2952.
Other accessories and fixing
2010 gliders are available with various hook types. Metal end stop with eye 2001-50-M-N. Glider stop 2004. Pilot runner with overlap 4074-1000 or without overlap 4075-1000. Suitable for Goelst Flow bespoke curtain systems.
Ceiling mounting on clip 2254 if hanging light curtains.
Wall mounting with luxury model extension bracket 2917-09 or 2917-15, or extension bracket 2915: for different distances from the wall.
Spacing between support points in accordance with the G-Standard or the table below.
|
curtain type |
light |
medium |
heavy |
|
per package |
2 kg |
4 kg |
8 kg |
|
2901 |
60 |
45 |
35 |
General advice: place an additional bracket on the stacking side(s) and, if possible, a support point immediately before and/or after a curve.
Bending
Radius 20cm: bending tool 1015
Radius 25 cm: bending tool 1015
Radius >150 cm: bending tool 1018
Maintenance
General advice: impregnate with Goelst silicon spray (1251-250) at least 1x per year.
With the Goelst 2901 track, you can create a perfect overlap. Because of the low profile height of 8 mm, the track is barely visible. In addition, this track has a superior finishing and two can be fixed precisely parallel to each other to form an elegant combination. The track can be used in the private and/or corporate sector.
Features
- Aluminium track; the 2901 can be bent
- Ceiling mounting, in a window opening or with adjustable extension brackets
- Available as standard in white
- Lengths: 4m and 6m
- Compatible with the Goelst Flow System for regularly pleated curtains.More info about the Goelst Flow System
- High-quality coated aluminium
- Suitable for light or medium-weight curtains
The high-quality, carefully selected materials allow pleated curtains to run silently and smoothly.
Specifications
- Material: aluminium
- Coating colours: white RAL9010
High quality wear-resistant, extremely colourfast, UV-resistant coating - Dimensions (hxw): 8 x 40 mm
- Profile weight: 274 gr/m
- Maximum supported weight guideline: see fixing guide. An additional support point is recommended at points where pleated curtains gather when open.
Bending
The 2901 can be bent with the R20, R25 and R150 bending tools.
With the Goelst 2901 track, you can create a perfect overlap. Because of the low profile height of 8 mm, the track is barely visible. In addition, this track has a superior finishing and two can be fixed precisely parallel to each other to form an elegant combination. The track can be used in the private and/or corporate sector.
Features
- Aluminium track; the 2901 can be bent
- Ceiling mounting, in a window opening or with adjustable extension brackets
- Available as standard in white
- Lengths: 4m and 6m
- Compatible with the Goelst Flow System for regularly pleated curtains.More info about the Goelst Flow System
- High-quality coated aluminium
- Suitable for light or medium-weight curtains
The high-quality, carefully selected materials allow pleated curtains to run silently and smoothly.
Specifications
- Material: aluminium
- Coating colours: white RAL9010
High quality wear-resistant, extremely colourfast, UV-resistant coating - Dimensions (hxw): 8 x 40 mm
- Profile weight: 274 gr/m
- Maximum supported weight guideline: see fixing guide. An additional support point is recommended at points where pleated curtains gather when open.
Bending
The 2901 can be bent with the R20, R25 and R150 bending tools.
Advice and tips
- • Advice: Drill an additional hole on the stacking side(s).
- • Maintenance advice: for long-term optimal glider performance in every situation, we recommend using Goelst silicon spray 1251-250
- • The lead gliders are strong and suitable for attaching to a pull rod. Using a pull rod to open and close the curtains keeps the fabric clean and prevents stains and signs of wear.
Verzending en afhandeling
De verzendkosten bedragen:
€ 4,95 voor Nederland - Gratis levering voor orders vanaf € 75
€ 7,95 voor België - Gratis levering voor orders vanaf € 100.
Op werkdagen voor 1 uur 's middags besteld, zelfde dag verzonden.
Wij versturen onze pakketten met verschillende vervoerders:
DPD (lengtes tot 150 cm).
Transmission (lengtes vanaf 150 cm)
Enkel haken koorden via PostNL
