OPEN A NEW EXPERIENCE. Visit our new website: Qurails.com >

+31 (0)318 648100 | MON - THU 08:30 - 17:00h • FRI 08:30 - 16:00h CET

2600 HAND-DRAWN CURTAIN TRACKS

  • • An elegant curved curtain track that can be invisibly ceiling mounted for hanging sheers and light curtains
  • • The track flange is slightly longer on the visible side to conceal the fixing clamp
  • • As a result, the remaining gap is barely visible
  • • Compatible with the Goelst Flow System for regularly pleated curtains.
  • • Easy to bend and of exceptional quality.
The Goelst 2600 profile is a sleek rounded track that can be invisibly mounted. The track flange is slightly longer on the visible side to conceal the fixing clamp. This minimises the unavoidable gap between the track and the ceiling. Simple ceiling mounting using a fixing clamp; no brackets are visible.

Features
  • Elegant curved curtain track
  • Aluminium track; can be forward or reverse bent in different radii
  • Concealed ceiling mounting
  • Available as standard in two colours: white and anodised aluminium
  • Accessories available in matching colours
  • Length: 6m
  • Compatible with the Goelst Flow System for regularly pleated curtains. More info about the Goelst Flow System
  • High-quality coated aluminium
  • Sheers, light or medium-weight curtains

The high-quality, carefully selected materials allow curtains to run silently and smoothly, also round bends. The curtain track can be pre-formed to match customer requirements and delivered as a single piece to eliminate the disadvantage of separate bends and joins in the running length.

Specifications
  • Material: aluminium
  • Coating colours: white RAL9010
    High quality wear-resistant, extremely colourfast, UV-resistant coating
  • Colours: anodised natural aluminium
  • Dimensions (hxw): 9 x 15mm
  • Profile weight: 105 gr/m
  • Maximum supported weight guideline: see fixing guide. An additional support bracket is recommended at points where pleated curtains gather when open.

Bending

The 2600 can be forward or reverse bent to create attractive returns.

  • Minimum bending radius: 10cm with bending tool 1012
  • Standard bending radius: 10cm with bending tool 1012 or 1015
  • Other bending radii: greater than 80cm with bending tool 1018

Standard components


Gliders, end stops, end caps:
Twelve self-lubricating 2010 gliders per metre and two 2001 end stops per track system.
Fixing:
Fixing clamp with washer 2650
Accessories:
2x end caps 2653

Curtain tracks longer than the standard length can be joined together with connecting bridge 2652.



Optional components:


Gliders, end stops, end caps:
• 2010 gliders are available with various hook types.
• For perfectly closing curtains with an overlap of the curtain fabric, use pilot runner 4074-1000 or the smaller pilot runner 4075-1000.
• The 2600 curtain track is compatible with the Goelst Flow System: gliders 2014-060 or 2014-080.
• The 2012 click glider can be placed anywhere in the system. It is advisable to place gliders of this type on the stacking side.


Fixing:
• Concealed ceiling mounting with fixing clamp + washer 2650.


Accessories:
• Use the special glider stop for ‘spring-back’ curtain sets: fit the glider stop over a 2010 glider after it has been inserted in the channel profile. Several glider stops can be placed if necessary.
• Selection of various pull rods for opening and closing curtains by hand: usually used with curtains that are light in colour and show signs of wear more quickly and delicate curtain fabrics, such as sheers (in combination with lead gliders 4074-1000 or 4075-1000).

Material

Aluminium EN AW-6060 T66.
Shape and size tolerances in accordance with EN 12020.
Anodisation: in accordance with QUALANOD requirements, coating thickness 10µm. Natural colour anodised.
Powder coating: in accordance with QUALICOAT requirements, thick coating (+/- 100 µm), AkzoNobel/Goelst quality for improved gliding properties and excellent ductility. White RAL 9010.
2600 track weight: 105 gr/m.


Standard colours

Natural – anodised
White RAL 9010 – powder coated
Special colours available on request.


Standard accessories

Goelst self-lubricating, UV-resistant gliders made from high-quality plastic. Twelve 2010 gliders per metre and two 2001 end stops plus two 2653 end caps per track length.
Ceiling mounting with fixing clamp 2650 (and washer) (the amount required depends on the system length).
Connecting bridge 2652.


Other accessories and fixing

2010 gliders are available with various hook types. Metal end stop with eye 2001-50-M-N.
Glider stop 2004.
Screw 2614 (3.0 x 20 mm) for fixing clamp 2650. Pilot runner with overlap 4074-1000 or without overlap 4075-1000.
Suitable for Goelst Flow bespoke curtain systems.

Spacing between support points (cm) in accordance with the G-Standard or the table below.

curtain type

light

medium

heavy

per package

2 kg

4 kg

8 kg

2600

45

35

25


General advice: place an additional bracket on the stacking side(s) and, if possible, a support point immediately before and/or after a curve.


Bending

Radius 10cm: bending tool 1012 of 1015
Radius >Radius >80cm: bending tool 1018


Maintenance

General advice: impregnate with Goelst silicon spray (1251-250) at least 1x per year.

The Goelst 2600 profile is a sleek rounded track that can be invisibly mounted. The track flange is slightly longer on the visible side to conceal the fixing clamp. This minimises the unavoidable gap between the track and the ceiling. Simple ceiling mounting using a fixing clamp; no brackets are visible.

Features
  • Elegant curved curtain track
  • Aluminium track; can be forward or reverse bent in different radii
  • Concealed ceiling mounting
  • Available as standard in two colours: white and anodised aluminium
  • Accessories available in matching colours
  • Length: 6m
  • Compatible with the Goelst Flow System for regularly pleated curtains. More info about the Goelst Flow System
  • High-quality coated aluminium
  • Sheers, light or medium-weight curtains

The high-quality, carefully selected materials allow curtains to run silently and smoothly, also round bends. The curtain track can be pre-formed to match customer requirements and delivered as a single piece to eliminate the disadvantage of separate bends and joins in the running length.

Specifications
  • Material: aluminium
  • Coating colours: white RAL9010
    High quality wear-resistant, extremely colourfast, UV-resistant coating
  • Colours: anodised natural aluminium
  • Dimensions (hxw): 9 x 15mm
  • Profile weight: 105 gr/m
  • Maximum supported weight guideline: see fixing guide. An additional support bracket is recommended at points where pleated curtains gather when open.

Bending

The 2600 can be forward or reverse bent to create attractive returns.

  • Minimum bending radius: 10cm with bending tool 1012
  • Standard bending radius: 10cm with bending tool 1012 or 1015
  • Other bending radii: greater than 80cm with bending tool 1018

The Goelst 2600 profile is a sleek rounded track that can be invisibly mounted. The track flange is slightly longer on the visible side to conceal the fixing clamp. This minimises the unavoidable gap between the track and the ceiling. Simple ceiling mounting using a fixing clamp; no brackets are visible.

Features
  • Elegant curved curtain track
  • Aluminium track; can be forward or reverse bent in different radii
  • Concealed ceiling mounting
  • Available as standard in two colours: white and anodised aluminium
  • Accessories available in matching colours
  • Length: 6m
  • Compatible with the Goelst Flow System for regularly pleated curtains. More info about the Goelst Flow System
  • High-quality coated aluminium
  • Sheers, light or medium-weight curtains

The high-quality, carefully selected materials allow curtains to run silently and smoothly, also round bends. The curtain track can be pre-formed to match customer requirements and delivered as a single piece to eliminate the disadvantage of separate bends and joins in the running length.

Specifications
  • Material: aluminium
  • Coating colours: white RAL9010
    High quality wear-resistant, extremely colourfast, UV-resistant coating
  • Colours: anodised natural aluminium
  • Dimensions (hxw): 9 x 15mm
  • Profile weight: 105 gr/m
  • Maximum supported weight guideline: see fixing guide. An additional support bracket is recommended at points where pleated curtains gather when open.

Bending

The 2600 can be forward or reverse bent to create attractive returns.

  • Minimum bending radius: 10cm with bending tool 1012
  • Standard bending radius: 10cm with bending tool 1012 or 1015
  • Other bending radii: greater than 80cm with bending tool 1018

Advice and tips

  • • Advice: Place an additional support on the stacking side(s). See fixing guide.
  • • Maintenance advice: for long-term optimal glider performance in every situation, we recommend using Goelst silicon spray 1251-250
  • • The lead gliders are strong and suitable for attaching to a pull rod. Using a pull rod to open and close the curtains keeps the fabric clean and prevents stains and signs of wear.
  • • The 2600 is particularly suitable for mounting on a smooth surface.

Verzending en afhandeling

De verzendkosten bedragen:
€ 4,95 voor Nederland - Gratis levering voor orders vanaf € 75
€ 7,95 voor België - Gratis levering voor orders vanaf € 100.


Op werkdagen voor 1 uur 's middags besteld, zelfde dag verzonden.

Wij versturen onze pakketten met verschillende vervoerders:

DPD (lengtes tot 150 cm).
Transmission (lengtes vanaf 150 cm)
Enkel haken koorden via PostNL

Loading...
Please wait...